successor to the famous Bob Parker FBT/LOPT kit and
companion to the
Blue ESR meter kit. The Blue Ring Tester for FBT/LOPTs
and all Hi-Q inductive components
for line output or 'flyback' transformers and HF wound
components. Aids in the servicing of TV recievers, video
monitors and computer power supplies. Identifies horizontal
output stage faults.This ring tester is an inexpensive
and effective way to test any high Q inductive component.
It is especially useful for doing a quick check on flyback
transformers, line output transformers and other high
frequency inductive components like deflection yoke windings
and SMPS transformers.Hi Q = low loss inductive components.
A shorted turn or coil will show no rings. A shorted FBT
diode will show few or no rings.The LEDs on the left side
show the Q of the device being tested, more lights = higher
Q, i. e., no lights = short circuit, red = Bad or low
Q, yellow = ??? or medium Q, green = Good or high Q.
Testsin circuit, & test leads
Easy-to-read, high brightness red, yellow and green LEDs
display the Q of the device being tested.
Simple operation for fast easy diagnosis of faulty inductive
New Improved design increases sensitivity for low impedance
components such as SMPS transformers and deflection yokes.
Includes a ferrite core and mag
69.95 Blue Ring Tester KIT Canadian
89.95 Blue Ring Tester Assembled Canadian
Thanks for all your support since 1971
Hours: Tuesday to Friday 9:00 to 5:00 Saturday 9:00 to 4:00 Closed Sunday and Monday